![An 18th century straw bergere hat with ribbon trim, lying on a white sheet.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/IMG_5139.jpg)
Here’s the short version: I fell in love with a painting. I bought several yards of watered acetate ribbon. I bought a straw hat blank. I bled a bit. And then I fell in love. In short, I made a bergere hat with ribbons on. The longer version is a lot more comprehensive: a tutorial for an 18th Century trimmed hat!
A bergere is a flat-brimmed hat with a shallow crown. They started to show up in the second quarter of the 18th century, and as the wide flat brims balanced the wide panniered skirts of the 18th century, they stayed popular until skirt widths began to collapse again in the 1790s. Earlier hats were decorated quite simply, such as this simple example of a bergere hat –
![An 18th century pink woven bergere hat trimmed with a single row of pink ribbon puffs.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/c-201760-20hat-20via-20the-20met.jpg)
But as fashion styles grew more complex, they literally BALLOONED.
![Two fashion plates showing extravagantly trimmed 1780s hats.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/Cabinet-20des-20Modes-20ou-20les-20Modes-20Nouvelles-201-20Novembre-201786-20pl.-20III.jpeg)
Some of them are simply, quietly, elegantly beautiful.
![Two young girls in 1760s costume stand before a landscape. The younger girl holds a straw bergere hat trimmed with pink ribbons.](https://www.sewwhathappens.com/wp-content/uploads/2023/10/A-Nabobs-Return.jpg)
Tacking ribbons to a straw hat is not particular difficult. However, I like my bergere hats to be lined, so that the straw blank doesn’t catch on my hair or on the fine, delicate fabric of fine delicate caps.
Sewing the Lining:
I began this 18th century trimmed hat by pinning a piece of silk taffeta into the crown of the hat, and then pinning until the silk was more or less caught more or less neatly against the straw shell of the hat. And then I stitched.
Note: the photos of the lining being sewn are from a different hat with a covered top. This is why you’re seeing an intimidating number of pins sticking through from the other side. (Yes, there was blood. Just a splash. But it got the job done.)
![The inside of the crown of a hat. The crown is lined in white silk. A hand is trying to pull a needle through a forest of pins poking through from the outside of the hat.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/IMG_4523.jpg)
To cover the underside of the brim, I traced the outline of the hat on another piece of silk taffeta, and cut myself a circle of roughly the same size. I laid the silk onto the underside of the brim, pinned it into place and stitched down the outer edge. The stitching line is hidden by a bound ribbon, so you can hand-sew or use a machine – whichever feels more comfortable.
Once the outer brim is caught, pin it securely about an inch and a half away from the inner edge of the brim and cut through into the open center. Cut the excess away, leaving an inch or so of seam allowance, and then bit by bit, fold the raw edge under. Once you have MORE pins in place, stitch down your edge with whip or catch stitches (whichever bleeds less.)
![The inside of the crown of a hat. The crown is lined in white silk. Dozens of long steel pins are poking through from the outside of the hat.](https://www.sewwhathappens.com/wp-content/uploads/2023/10/IMG_4395-scaled.jpg)
Binding the brim:
Take your binding ribbon and begin to fold it around the edge of your hat brim, holding it in place with pins or clips. I personally love quilting clips for this job – they grip nicely without marking the fabric.
Begin tacking down the ribbon with small stab stitches – if you’ve balanced the ribbon over the top and bottom edges, you can catch both sides of it at once. Sew your way slowly around the edge of the hat brim, catching the small gathers in your stitches as you sew around the curve.
![A straw bergere hat lies on a desk. Aqua ribbon is being pinned down around the edge of the brim with quilters clips.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/IMG_4170.jpg)
And now you can Trim Your Hat!
Work slowly – take your time deciding where you want your ribbon placement – do you want tight puffs? Loose puffs? Large ones? Small ones? One row? Two? Bows? Do you have a very soft silk ribbon? A crisper taffeta one?
I trimmed this particular bergere with two rows of ribbon puffs – one stitched down at the base of the crown, and one half an inch or so further up. Let the ribbon show you how it wants to fall, and you’ll find that it is doing more than half the work for you.
![An 18th century straw bergere hat lying on a sofa seat. Rows of aqua ribbons are being pinned to the crown.](https://www.sewwhathappens.com/wp-content/uploads/2023/04/IMG_4361.jpg)
Play with the ribbons, stock up on bandaids, and at the end of it all, you’ll have a beautifully lined, beautifully trimmed confection!
This elegant hat is the simplest example of an 18th century trimmed hat. Here are a couple of other trimming ideas for you!
18th Century Hat Tutorial: American Duchess Brain Hat
18th Century Hat Tutorial: Two Christmas Bergere Hats